Plug blank under seat?

[Jay]

Anyone know what this plug under the seat is for? It wasn’t obvious from the wiring diagrams and the maintenance manual only references the OBD-II port. Wondering if this has any usefulness.

 

[Jagster]

You need that socket when you land your Rocket on the moon.

 

[imcool]

Anyone know what this plug under the seat is for? It wasn’t obvious from the wiring diagrams and the maintenance manual only references the OBD-II port. Wondering if this has any usefulness.

Its for alarm (accessory) if you buy it from Triumph, then thats where it goes.

 

[Jay]

Its for alarm (accessory) if you buy it from Triumph, then thats where it goes.

Ah, thanks. That means there is likely switched power to this plug as well and could run a relay. This is good to know.

 

[TURBO200R4]

That might be interesting to play with.
Does it have looped wires? Will the bike run if it is disconnected?

 

[imcool]

That might be interesting to play with.
Does it have looped wires? Will the bike run if it is disconnected?

well its always open/empty port, i think you have enable in ECU from dealership once alarm is installed.

 

[Kevin frazier]

Jay did you checked with multimeter?

 

[Jay]

Jay did you checked with multimeter?

Good news, it is switched. I found one of the leads is always hot and another one is switched. So it offers an opportunity to tie in for switching a relay or triggering a power block. Now to identify the brand and part code for the 8-port connector and pins. If anyone has better insights, please post here.

 

[imcool]

Good news, it is switched. I found one of the leads is always hot and another one is switched. So it offers an opportunity to tie in for switching a relay or triggering a power block. Now to identify the brand and part code for the 8-port connector and pins. If anyone has better insights, please post here.

what are you trying from that plug?

 

[Jay]

what are you trying from that plug?

I don’t have a specific plan yet, however, in the past, I’ve used power distribution modules that could be triggered by switched power. So still working through the plan.