only 21 mpg...

camccardell said:

I did not send any information to the ecm. I only read the tune that is on it. The last time i sent a tune to the bike was a few years ago.
The diagnostics tab seems to be working. The needles on the gauges move appropriately. I did install a new stepper motor about 3 years ago and had to go thru the whole process.
My problem is now, that i can read and send maps as well as use the diagnostics tab. I just cant run any of the tests for some reason.

I physically changed the tps sensor, but that is all. I haven't changed anything in the tune or ecm.

Click to expand...

camccardell said:

I do not recall what tune is on the ecm. I think the one for the ramair and the jardine exhaust.

Click to expand...

warp9.9 said:

OK so your hooked up to the bike. TPS light is green. Is it green on ever tab (page) as in Map edit, Diagnostics, and test page ? It should be. also are you using a battery charger so wee can make sure your battery power does not get weakened and cause us grief? and send me the map you copied
szczepaniak@grics.net I will also need to be refreshed on pipes I know they are after market and I will look but if you have not posted a picture please do or send me one. Forget it I remember classic with the R3T bags added closest tune would probably be a Jardine tune which I have a few you might want to try. As so as wee get you linked up a proper tune loaded and your ISCV reset done you should be right into a 12 minute tune and riding


this is getting technical I had better grab the mason jar

Click to expand...

camccardell said:

Well I installed some dpr7ea9 plugs. Got rid of the 8s.
They all looked alright.

I did manage to get tune ECU working. Overnight on the battery tender took care of that.

So what now? You've seen the plugs and the exhaust. What do you guys think?

On a side note, I noticed that the exhaust coming out of one side is a lot cooler than the other side which seems weird. I put the ir sensor on each port and they all read the same temp, so I know they are at least firing.

Nobody around here with a dyno that will help me. Apparently Harley dealers won't dyno a non Harley bike...

Click to expand...