Missing at 2500 rpm in 5th, also coughs at getting down on it

[Rickster]

resolved issue

OK, not sure which was the thing that corrected the issue.
i had added sea foam to the gas for the 2nd time and it set this time for 24 hrs.
before firing it up yesterday, i pulled all connectors and packed with di-electric grease,
also trimmed and greased the coil wire connectors.

took bike out and it is running as it should again .

no missing when getting down on it, no missing running in 5th at 2500 rpm and then getting down on it. hope it holds,

thanks to all your advices.

Rickster :bch:

 

[HansO]

OK, not sure which was the thing that corrected the issue.
i had added sea foam to the gas for the 2nd time and it set this time for 24 hrs.
before firing it up yesterday, i pulled all connectors and packed with di-electric grease,
also trimmed and greased the coil wire connectors.

took bike out and it is running as it should again .

no missing when getting down on it, no missing running in 5th at 2500 rpm and then getting down on it. hope it holds,

thanks to all your advices.

Rickster :bch:

even thu it would nice to explore the bikes bits and pieces otherwise, it has now given you some insight as to where to start looking if ever you need to