K&N 4040

[Old N' Grumpy]

And the 1770s

Very cool! Hard to tell from the pic but do you know if the 1770's are the shortest of the bunch?
The more I look, the 4040's look maybe a little too big.

 

[Neville Lush]

there is a 2510 filter which works well. If one is worried about the fitment, I guess you could always LOOK in the online K&N catalogue and check all the dimensions. The 2510 is on a 20 degree angle like the 1770, but the filter is tapered. They both have a long flange on them which can be shortened by approx 40mm to lower the top of the filter below the line of the tank. They are also( and this seems important) cheaper than 4040. I have achieved 250hp with 1770's so I don't think most will be held back by them or the 2510 for that matter. If you wish to retain the bearclaw then Hanso is correct, the ramair works quite well.

 

[Old N' Grumpy]

there is a 2510 filter which works well. If one is worried about the fitment, I guess you could always LOOK in the online K&N catalogue and check all the dimensions. The 2510 is on a 20 degree angle like the 1770, but the filter is tapered. They both have a long flange on them which can be shortened by approx 40mm to lower the top of the filter below the line of the tank. They are also( and this seems important) cheaper than 4040. I have achieved 250hp with 1770's so I don't think most will be held back by them or the 2510 for that matter. If you wish to retain the bearclaw then Hanso is correct, the ramair works quite well.

Thank you for that info Sir...appreciate it!

 

[BigKel]

SN 2510

 

[Old N' Grumpy]

SN 2510

Nice!!! I bet that badboy screams...where did you get those cool mirrors and levers?

 

[Old N' Grumpy]

Nice!!! I bet that badboy screams...where did you get those cool mirrors and levers?

Are those 4040's?

 

[BigKel]

Are those 4040's?

They are the 2510 filters. I got the levers and mirrors from the local triumph dealer in Perth

 

[Old N' Grumpy]

They are the 2510 filters. I got the levers and mirrors from the local triumph dealer in Perth

Now on a mirror mission...thanks BigKel!

 

[BigKel]

Now on a mirror mission...thanks BigKel!

They are on Thunderbike T bars, I don't think they will go on stock bars as they have different ends

 

[Old N' Grumpy]

They are on Thunderbike T bars, I don't think they will go on stock bars as they have different ends

They are on Thunderbike T bars, I don't think they will go on stock bars as they have different ends

****...****...****!