Gary: I don't have stock pegs. I removed them after the bags were already on there! All you should have to do is place a threaded bolt the size required and a spacer, I'm thinking about a 3/4 inch spacer in the hole where the pegs would go, tighten the bolt in order to secure the bracket that holds the Corbin mount kit. That mount only needs to brace the Corbin bag bottom and seat the screw that holds the bag securely in place in the bottom of the bag! I would suggest screwing the bracket to the bottom of the bag, then determine the length of the spacer you need.
My rear passenger pegs are Kuryakyn and I mounted them by drilling through the swingarm and the swingarm cover!
Native One
My rear passenger pegs are Kuryakyn and I mounted them by drilling through the swingarm and the swingarm cover!
Native One