At last...It's all good now.

ant

Turbocharged
Joined
Aug 22, 2011
Messages
681
Location
West Sussex UK
Ride
Triumph rocket 3 2007
After trying for a couple of hours to download Tuneecu on my laptop with Windows 8.1 with no joy..Lucky i still have my old laptop with Windows 7 so i thought i would give that a go.I had no problems downloading Tuneecu drivers etc..connected to bike and changed map the throttle bodies we out 1=640 2=640 3=620 so adjusted them.Happy bunny now.

So glad it's all sorted now..Tuneecu is a handy piece of kit.
 
It was a headache when i tried to install the Tuneecu using the windows 8.1..First gathered as much info about downloading drivers etc and getting the right cable with the right chip..At one point i thought the cable i have was faulty,check the chip and the pcb all looked ok,checked and cleaned the socket on the bike all looked ok..Still no joy and would not connect..Uninstalled and reinstalled everything and still no joy.

I am not 100% sure why when i used my old laptop and window 7 it all came together....but glad it did.

Sorry Steve yours is not working mate..Don't give up
 
Just FYI, I bought a small, cheap computer with Windows 8, just to use TuneECU, but couldn't get it to work. However, I also, got it to work on my old Windows 7 computer...
 
That's interesting perhaps Windows 8 is a no go then or were we both missing something,wonder if anyone has managed to use Tuneecu with Windows 8...Glad i didn't give up and tried my Windows 7..
 
ant said:
That's interesting perhaps Windows 8 is a no go then or were we both missing something,wonder if anyone has managed to use Tuneecu with Windows 8...Glad i didn't give up and tried my Windows 7..
Click to expand...
I had problems with Windows 8 for a lot of activities but people on the forum said it hooked up with the cable.

When you try to install the driver, do you get into the Device Manager? And see the com and usb devices when you plug the cable in?
 
Last edited:
For me.. yes i could see the com and usb devices but for some reason i could not change between them on the tuneecu interface.... but i could with windows 7 and could click them to change them from com to usb..That's what made me think it was something to do with the cable driver...I might one day have another try.
 
I'm using Windows 8.1 and TuneECU just fine...... don't ask me how because I will not be able to tell you. lol
 
You must log in or register to reply here.

Similar threads

Hesitation at 2000 rpm, 100% throttle
2 3
Replies
20
Views
1K
Mongler07
Looking for a good tune.
2
Replies
11
Views
3K
G-Force Junkie
Hi all Can you still get tune ecu for windows
2
Replies
17
Views
6K
Bigjaype
ECU Map and PVC with AT
2 3
Replies
20
Views
2K
sleeves
Installed RamAir and TORS last night.
2 3 4
Replies
36
Views
5K
Starmanut
Menu
Log in
Register