barbagris
Mad Scientist
- Joined
- Aug 1, 2010
- Messages
- 12,988
- Location
- On the verge of insanity
- Ride
- 1979 Guzzi V1000G5 - 2018 KTM 790 Duke
There is a 3rd - undocumented but very simple method. ACTIVATE IT IN THE PCV SOFTWARE.Apparently there are 2 methods, one involves a dyno and the other way is to contact dynojet for the parameters for our bikes.
If the base map used originally was an R3 map as supplied by Dynojet - the gear ratios are already in there.
This PC is Linux so I cant run the SW - but if you're still stumped I can switch on the workshop Win10 Pc and take a look.