Shifter for Classic

1olbull said:
IMHO -
All that linkage crap just seems redundant to me!
Tis much cleaner and efficient without it.
Click to expand...
Ya the way he did it was nice more room everywhere on the floor board because the heel section does not have as much offset as the front. Me I have so many miles on the heal toe shifter I am lost without it
 
1olbull said:
FYI - This is a shift lever for a Storm that I have just installed on my Roadster with Standard rails and boards.
Click to expand...
Mr Bull,

Would you be so good as to post the length of the Storm shifter from center of shaft to center of toe pad?
Inches or millimeters is fine.

I've tried several aftermarket shifters and they are all shorter from the shaft to toe than the stock standard.
The pic looks like the Storm shifter is as long or longer than stock but I'd like to know for sure.

Thanks for the pic and part numbers.
 

Four and three eighths inches.
The toe pin fits perfectly at the base of my big toe and allows use of the entire board area for my foot.
 
1olbull said:
Four and three eighths inches.
The toe pin fits perfectly at the base of my big toe and allows use of the entire board area for my foot.
Click to expand...
I ordered it. I had the same shifter on my T-Bird, just didn't occur to me it would fit on the R3. I put the longer Kury longhorn peg on the T-Bird and will try that when the new one comes. Thx.
 
dougl said:
I ordered it. I had the same shifter on my T-Bird, just didn't occur to me it would fit on the R3. I put the longer Kury longhorn peg on the T-Bird and will try that when the new one comes. Thx.
Click to expand...

I rode over to my local Triumph dealer and measured up my Roadster and found a compatible Storm model.
The parts guy was nice enough to look it up and provide me with the part numbers.
 
1olbull said:
I rode over to my local Triumph dealer and measured up my Roadster and found a compatible Storm model.
The parts guy was nice enough to look it up and provide me with the part numbers.
Click to expand...
Well, here's my T-Bird shifter with Kuryakyn Longhorn ISO shifter peg. Thanks! (it better fit).

Frickin' picture:


BTW, it fits.
 
Last edited:
Lonzol said:
Honda crf 100 shifter, about $20.
Click to expand...

Not as handsome, but WAY cheaper and it appears to be slightly longer, which IDK if better or no. Thanks for posting!
PS: How's the trip going?
 
1olbull said:
Not as handsome, but WAY cheaper and it appears to be slightly longer, which IDK if better or no. Thanks for posting!
PS: How's the trip going?
Click to expand...

Yea I agree on the handsome part, just didn't have a Triumph dealer in my old home town. Trip went good, Thanks. Probably the last long ride of the year for me....Winter, Yuck!
 
Lonzol said:
Yea I agree on the handsome part, just didn't have a Triumph dealer in my old home town. Trip went good, Thanks. Probably the last long ride of the year for me....Winter, Yuck!
Click to expand...

Come and hang in the northwest, your winter hatred shall grow exponentially!
 
You must log in or register to reply here.

Similar threads

Alternative tool/equipment boxes for Rocket 111 Classics
Replies
3
Views
237
Kim Turner
2009 Rocket III Classic fairing
Replies
4
Views
969
Koko3052
Crash/highway bars for '09 Classic
Replies
0
Views
435
RIchareno
Front tyre for a trike
Replies
9
Views
521
Al Burdon
Differential slider for 2025 GT Storm
Replies
2
Views
301
Razorine
Menu
Log in
Register