ROCKETHEAD
Top Fuel
As long as you pay shipping... It all evens out...Might get one of our American brothers to buy a set for me.......
Bruce, do you know yet whether these will fit a pre-Roadster model?
Rocket science
- Thread starter bruce aussie
- Start date
TOMCAT
Rage against the machine
- Joined
- Jan 9, 2011
- Messages
- 9,259
- Location
- ALBANY - Western Australia
- Ride
- 2009 RIII Standard - 2008 Speed Triple -1995 900 T'Bird
Funny thing is the stock Triumph headers ( without the chrome heat shields/ covers) just the headers are actually dearer than these. Triumph Australia quoted me $1,700 for stock headers.
CanberraR3
Living Legend
- Joined
- May 27, 2010
- Messages
- 11,337
- Location
- Canberra, Australia
- Ride
- Triumphs, but no Rocket just now.
Bet they're a big seller. 
When we were assessing the damage to Amanda's America the cost of replacing her brand new TOR pipes was about $500 less than it would have cost to replace the stock pipes. In the end it was written off so it didn't make any difference.
When we were assessing the damage to Amanda's America the cost of replacing her brand new TOR pipes was about $500 less than it would have cost to replace the stock pipes. In the end it was written off so it didn't make any difference.
bruce aussie
WOODENBONG
Finished results on a stock Roadster with 20,000klm
Mittzy
The Hooligan - Just Doing Stuff
- Joined
- Aug 29, 2011
- Messages
- 8,533
- Location
- Brisbane, Australia
- Ride
- 2020 TFC #385, 2014 R3 Roadster 230hp (BRUTUS)
Great numbers mate.
CanberraR3
Living Legend
- Joined
- May 27, 2010
- Messages
- 11,337
- Location
- Canberra, Australia
- Ride
- Triumphs, but no Rocket just now.
Anyone in Brisbane with a Standard prepared to take your bike in to Trev to see if the headers will fit, especially behind the brake master cylinder?
Mittzy
The Hooligan - Just Doing Stuff
- Joined
- Aug 29, 2011
- Messages
- 8,533
- Location
- Brisbane, Australia
- Ride
- 2020 TFC #385, 2014 R3 Roadster 230hp (BRUTUS)
I think Les might talk to peter k.
ozrider
2008 Standard
You would have to be pretty happy with that Bruce, That is cheap horsepower
how does it feel now you have 100% secondries etc
Last edited:
ozrider
2008 Standard
I know Trev was trying to get one to suss it out, I will be in contact with him on Monday and find out
bruce aussie
WOODENBONG
I went for a bit of a ride yesterday, it was 29c here around town at 60 kph I could feel the heat from the pipes on my leg. I could always feel the heat with the old pipes too but These are a little bit warmer. Once you get moving the grin and the noise overcomes any thinking of heat. As for noise, the induction noise from the Ramair is louder than the exhaust noise when the throttle bodies are wide open. No chirping or cheaping just a sort of slapping roar if that makes sense. I don't know if I like it or not, but I'll live with it. Les has offered a loan of an Ozclaw to try. I will give it a go as I like the look of it anyway and more cool air in the air filter can't hurt. If it silences the induction noise a bit well that will be a bonus. Well enough of this Les and I are going for a ride up the coast.
Similar threads
