This is done so seldom one usually forgets how and has to reinvent the wheel.
After several bar changes, I have bit the bullet and changed out my bars to a set that required lengthening all my wiring and the control cables.

This long-ass adventure has involved many iterations of routing, connecting, removing, reconnecting both of the throttle cables and the clutch cable before I finally arrived at my sweet spot. I reckon now that I have finally got this stuff straight!

Just FYI - I thought it may be helpful to offer others what I have found to be the best Clutch Cable install scenario.
Rocket-Clutch-Cable-Install.jpg

If folks find this helpful, I shall also do one on the throttle cables.
Been battling n researching most effective method od clutch cable adjustment...tshhh wow literally since yesterday afternoon. And gotta say I think this method put me right on the money . Or closest to what I assume is rocket perfect? Combined with some revelation type advice from turbo I believe? Thank yas all. As always
 
Back
Top