crashpete

Supercharged
Joined
Aug 21, 2013
Messages
216
Location
Surprise, AZ
Ride
2012 Triumph Rocket 3 Roadster
In the middle of an oil change, I discover that I don't have the proper k&n 204 oil filter, but I do have a k&n 303 that fits, and is a little taller of a filter compared to the k&n 204, thoughts? Same diameter too.
 
Can't help you there. I use the Mobil M1-108 oil filter from my local auto parts store.
 
Thanks for the info on the Mobil 1 filter, I found one of them and a k&n at a pep boys in Tucson, just in case.
 
Pete if the 3 is a little longer you will just notice a color stripe between the engine and the oil chrome cover. Mine is almost a inch longer and works well. As long as you can put the cover over the filter to protect it you will be fine.
 
When you're ready to step up go with a PC Racing Flo (Stainless Steel Reusable Filter)

Part # PCS1. $119 bought mine on Amazon $89 + free shipping.

Just rinse it out...problem solved. Even comes with an extra rubber gasket.

A friend of mine (a Yamaha R1 rider) swears by this filter and bugged me to buy one until I did. I've got to admit he was right about it being 1st rate, (don't tell him I said he was right though, his ego doesn't need further inflation).

K&N is only just now starting to enter the market with their version of this type filter.

(I was using K&N oil filters on my Rocket before I bought this one from PC Racing, and I use their air filters and oil filters on my other vehicles so I'm not knocking K&N by any means.)
 
Back
Top