Need help, won't go over 2000rpm, video.

[cskals]

Hi all.
After a gearbox fix, my bike won't go over 2000rpm .
It misfires and drops in rpm.
Link to video:

Hope someone can help me, thanks all.

 

[Idaho Red Rocket 3]

Not sure, but I would think one of the sensors is buggered.

 

[skydog1000]

Help @warp9.9

 

[kipper]

Have you got the valve timing right ?

 

[idk]

Hook up your TuneECU and check TPS, and also see what codes come up.

Check low tension leads and connections to the coils, spark plug leads, vacuum tubes, and crank position sensor.

 

[Jag]

It’s the blue paint causing the problem! Try the OEM color! Lol

 

[TURBO200R4]

clean crank sensor for a start.

what the others said

 

[warp9.9]

Hey when you put the throttle bodies back on did you pay very close attention to where the front lower throttle bod hose clamp screw is. Some people realize its better located up front so its easy to get at. Then they learn the throttle linkage hits it not allowing you to open the throttle. Of course as stated above a full ISCV CHECK/RESET should be run prior to firing her up from total dissasembly. This also allows you do various preliminary test prior to firing her up and damaging it. Quick question you did not mess or release the cam change tensioner, did you ?