Mittzy
The Hooligan - Just Doing Stuff
- Joined
- Aug 29, 2011
- Messages
- 8,533
- Location
- Brisbane, Australia
- Ride
- 2020 TFC #385, 2014 R3 Roadster 230hp (BRUTUS)
Fuel pump Assembly. The filter has the arrow on it....
and the fuel level sender unit is in between the pump and filter with the float arm going to the front - so you MUST be a little careful with the float. Get the unit lose and ease it out a little then LOOK for the float the just bring them both out together with a bit of a twist and wiggle and holding your tongue in the right place. You will be alright--- If I can do this you are all over it..... like a fat kid on chocolate cake.
and the fuel level sender unit is in between the pump and filter with the float arm going to the front - so you MUST be a little careful with the float. Get the unit lose and ease it out a little then LOOK for the float the just bring them both out together with a bit of a twist and wiggle and holding your tongue in the right place. You will be alright--- If I can do this you are all over it..... like a fat kid on chocolate cake.
Last edited: