Handlebar Riser Blocks

[PappyBlade]

I'm looking into having blocks like these made for my '15 R3R. If I were to have them made and have several extras, would anyone be interested? These are from an HD. I'll have mine made to fit the curve and bolt position perfectly. They will NOT be chromed, just milled aluminum.

Let me know so I can judge interest. I'll advise on cost/pricing once I meet with the machine shop later today.

 

[Claviger]

Interested.

 

[PappyBlade]

Got a rough estimate, anything less than 500 pair would cost me $500 each pair.

 

[Claviger]

OUCH!

 

[PappyBlade]

OUCH!

Yeah... with computer setup and machining time, along with the aluminum... I had hoped they'd come in about $200.

Sorry for getting anyone's hopes up.

 

[barbagris]

Found something similar - sold for the new Bonnevilles - but they are under 1/10th the price including the bolts. Triumph Bonneville & T100 1 Dia Bar Risers 25mm 1 Inch Diameter Bars.

 

[PappyBlade]

Found something similar - sold for the new Bonnevilles - but they are under 1/10th the price including the bolts. Triumph Bonneville & T100 1 Dia Bar Risers 25mm 1 Inch Diameter Bars.

My concern is the bolt pattern. The ones I have shown in the pic would work fine but the holes don't line up with the OEM riser bole holes.

 

[barbagris]

I have a set of the Bonneville ones on my R3. I used them to lift teh instruments higher and leave the bars where they were - but they fit.

 

[PappyBlade]

I have a set of the Bonneville ones on my R3.

THAT is what I needed to hear! SOLD!! I'm ordering them now!

Thanks 2300cc's worth!

 

[barbagris]

They are NOT a perfect aesthetic fit. At least the ones I have are not. They are a bit slimmer side to side. But the bolt holes match.