EZ bracket to OEM saddlebag mount
So they are not stainless then as I was wondering how you would get on welding the stainless to the mild steel Triumph bag support frame
 
HansO said:
So they are not stainless then as I was wondering how you would get on welding the stainless to the mild steel Triumph bag support frame
Click to expand...
Not ideal but it's not a problem welding stainless to mild, best to use stainless wire if it has to be done
 
I've used EZ brackets on OEM and non OEM leather and hard bags on 2 Rockets and a T-Bird without any of the stock mounting stuff and it worked fine.
 
dougl said:
I've used EZ brackets on OEM and non OEM leather and hard bags on 2 Rockets and a T-Bird without any of the stock mounting stuff and it worked fine.
Click to expand...
Yeah, but you cannot mount the cool cage chrome embellishment then and have to make extra holes in the oem bags too.
 
HansO said:
So they are not stainless then as I was wondering how you would get on welding the stainless to the mild steel Triumph bag support frame
Click to expand...
Tig weld it - it is pretty easy and you end up with a tidy finish.
Can mig also but not as tidy as the weld will be bigger
 
I am also in the process to install hard bags on EZ brackets outside of the quick release mount from @Mittzy these bags were from an indian model they look good on the rockets and were dirt cheap since the bags were scratched when the indian was totalled , the bags were basically intacts
 
Thread to read for you two @phar2slo and @Mikethepie (if you get EZ brackets too Mike)

Chris if you get your minions at your workshop to do it, get them to weld back on the 1.5cm x 1.5cm steel tabs that the EZ Bracket locks engage on or near.
The tabs are/were fitted under the two bolts threaded in place from memory. It works as is and has done 1000's of K's that way without movement but does locate them out quitw far when the EZ brackets are fitted to the stock frames without alteration.
 
You must log in or register to reply here.

Similar threads

Airbox Delete - Mounting Questions
2
Replies
12
Views
250
CrzystghndKC
Looking for a company that makes easy steer-type triple trees for mounting sidecars
Replies
4
Views
417
dog hauler
Side license plate bracket.
Replies
1
Views
512
Ishrub
How to add mid pegs with front peg controls without buying midpeg mounts
Replies
0
Views
424
509GT
Painting OEM exhausts
Replies
2
Views
1K
Starfighter
Menu
Log in
Register