Hi there R3 guru's!
I'm running Ramair and a Paul Bryant muffler with the stock headers.
After a weekend in the hilly twisties outside Melbourne, I've notice a slight discolouring of the inlet side of the muffler, which Paul has confirmed is unusual, so I'm thinking a bit too hot due to a too lean mixture.
Does anyone have a tune I can compare mine with?
At the moment I'm running a tune modified for:
Triumph off road pipes and cat box eliminator
TuneBoy pod airfilters fitted under bear claw.
Hi there R3 guru's!
I'm running Ramair and a Paul Bryant muffler with the stock headers.
After a weekend in the hilly twisties outside Melbourne, I've notice a slight discolouring of the inlet side of the muffler, which Paul has confirmed is unusual, so I'm thinking a bit too hot due to a too lean mixture.
Does anyone have a tune I can compare mine with?
At the moment I'm running a tune modified for:
Triumph off road pipes and cat box eliminator
TuneBoy pod airfilters fitted under bear claw.
The tors are more restrictive than Paul's I am sure, so you are probably too lean now. My tune would not be suitable but Paul or @HansO may be able to set you up with one more suitable.
You are surrounded by water n-s-e-w so you are, so going back to my high school days you are usually considered the largest island but the smallest continent. not bad best of both worlds.
Thanks...I've been checking the clamp after every ride and the last couple of outings its been good.
Hopefully I can still get to a Dyno this month which will solve any tuning issues. It's just making time to do it!!