Emgo's vs K&N's
- Thread starter britman
- Start date
HansO
Not Taking Life Too Seriously
- Joined
- Apr 4, 2010
- Messages
- 13,447
- Location
- Batemans Bay, NSW, Aus
- Ride
- 08 Rocket III R.I.P now TEX Triumph Explorer
Don't know dont care I only put Quality Full Syn ($80 for 4 litres) Oil, K&N Oil Filters on and in my $24,000 investment, no second rate stuff for my "Mistress"
warp9.9
Pocałuj mnie w dupę
Don't know dont care I only put Quality Full Syn ($80 for 4 litres) Oil, K&N Oil Filters on and in my $24,000 investment, no second rate stuff for my "Mistress"
I run the Purolator Synthetic filter with Joe Gibbs Hot Rod oil.
As Hans stated nothing it to good for beast.
HansO
Not Taking Life Too Seriously
- Joined
- Apr 4, 2010
- Messages
- 13,447
- Location
- Batemans Bay, NSW, Aus
- Ride
- 08 Rocket III R.I.P now TEX Triumph Explorer
excuse my ignorance but I have never heard of either brands or are you just **** talking again Scott
I almost feel daft asking this, but manual states API SH (or higher), but I've been told not to use higher than SJ due to a drop in levels of useful oil components to reduce emissions/protect engine or something like that. Is that true, or can I just go ahead and use SL for example, as there are more options then.
Just want a second on that one.
Just want a second on that one.
HansO
Not Taking Life Too Seriously
- Joined
- Apr 4, 2010
- Messages
- 13,447
- Location
- Batemans Bay, NSW, Aus
- Ride
- 08 Rocket III R.I.P now TEX Triumph Explorer
Mate as far as I am concerned the most important thing to look for is that it meets JASO MA it is bike specific oil grading and an assurance that there is no clutch damaging anti-friction additivesI almost feel daft asking this, but manual states API SH (or higher), but I've been told not to use higher than SJ due to a drop in levels of useful oil components to reduce emissions/protect engine or something like that. Is that true, or can I just go ahead and use SL for example, as there are more options then.
Just want a second on that one.
vanguard138
Living Legend
Hellfire,
It looks like your Rocket has a bigger engine than your car
Rick
It looks like your Rocket has a bigger engine than your car
Rick
tekardi
.060 Over
Like your EMGO very much I put on mines also since your post now I need to cut bear....I was wondering to do 3 holes on it ....don t like to cut strait ...
Upgrading now
What do you think? Will put some rubber finish in each hole but I run out of Dremmel saws to finish
Finished
Upgrading now
What do you think? Will put some rubber finish in each hole but I run out of Dremmel saws to finish
Finished
zenbiker
Zenbiker
I really like that look much more than having three cut outs for the trip filters!
Similar threads
