dyno ...not bad..

[albertaduke]

went to nels Byersdorf dyno shop in woodinville near seattle and got my tractor dynoed just before @IOBULL all I did was put on a ramair and jardine pipes the numbers are rear wheel numbers

 

[1olbull]

Patrick,
Please allow me to assist . . .
NOTE: Red was the previous tune which was running very lean.
Blue is the Nels tune.

 

[albertaduke]

Patrick,
Please allow me to assist . . .
NOTE: Red was the previous canned tune which was running very lean.
Blue is the Nels tune.

he smoothed out the dip you see on the chart and found some ponies along the line somewhere... the guy is a genius..

 

[Torque addict]

Curious if you have a power commander or if he did that all in the ECU with TuneECU. Nels will be tuning my turbo Rocket. Had him do a baseline pull before I ripped the engine apart. He has also tuned my Yamaha Warrior. Good guy. If it weren't for the problems I'm having with my new !@#$*! Dynojet ignition module he'd probably be tuning it this week. Instead, it's in a box right now getting shipped back to Dynojet with the PCV and I can't even ride bike.

You ride all the way down from Canada just to have your bike tuned by Nels? I'm fortunate enough to live only 10 miles away from his shop.

 

[Lenny]

Lucky you....here in the East Coast finding a tuner its like pulling teeth...

 

[fatboyslim]

Patrick,
Please allow me to assist . . .
NOTE: Red was the previous tune which was running very lean.
Blue is the Nels tune.

Is that tuneecu?

 

[1olbull]

Is that tuneecu?

Absolutely!
ALL Tune ECU!
If a "tuner" only used Power Commander, FIND ANOTHER tuner!!!

 

[albertaduke]

Curious if you have a power commander or if he did that all in the ECU with TuneECU. Nels will be tuning my turbo Rocket. Had him do a baseline pull before I ripped the engine apart. He has also tuned my Yamaha Warrior. Good guy. If it weren't for the problems I'm having with my new !@#$*! Dynojet ignition module he'd probably be tuning it this week. Instead, it's in a box right now getting shipped back to Dynojet with the PCV and I can't even ride bike.

You ride all the way down from Canada just to have your bike tuned by Nels? I'm fortunate enough to live only 10 miles away from his shop.

honestly there was a great two day ride organized by @1obull so I rode highway #20 (northcascade) down to woodinville where I confirmed my slot at nels shop next day.
Steve and dan showed up around 11am next day we got our bikes tuned mine has no PC commander nada nothing just an ECU . we then rode next day to fork and around the peninsula breathtaking views !! steve(1obull) is a very good organizer.dan is his brother ride a yam something no offence dan!!he also came along with a few more bikes (7 total and a slingshot)
when I returned to canada 60 miles from home a suz 109 tried to shake me off i stayed with him and had reserve to pass (thanks to nels)him but wanted to talk to him at a stop told him if you see a R3 behind you do not try this foolishness you will lose ..

 

[fatboyslim]

Absolutely!
ALL Tune ECU!
If a "tuner" only used Power Commander, FIND ANOTHER tuner!!!

Is the tune available for download?

 

[1olbull]

Is the tune available for download?

The tune is specific to my ECU, engine and components.
Even if could, I wouldn't trust loading it, were I you.

Looks like you hail from Arkansas? You fortunate devil, you!
I've spent two weeks on two separate trips from Washington State riding the NW quadrant of your fine state!
Ride out here to the beautiful Northwest and I shall take you to see Nels Byersdorf just as I did @albertaduke.