Camera Mount for handlebars?

[Psydone]

Guys
I'm looking for a simple camera mount to mount a photo camera to my bars, have you guys seen anything simple, don't want the big bull**** lever action just a simple click on and go.

Kris

 

[RiderRocketman]

Check this out...

http://www.twistedthrottle.com/trade/pr ... w/2210/242

Should work with Rocket since the gas caps are basically same as other the Triumph models listed.

If you don't like the gas cap deal, you can also look at generic RAM mounts and make your own by combining parts from a camera tripod.

http://www.whitehorsepress.com/index.ph ... 498f5586e4

 

[Psydone]

mmm, both solutions look really clunky, I want just a neat little platform, might twist my arm eventually

 

[RiderRocketman]

Check this stuff out...

http://www.custommounts.com/RAM_B_149ZA ... za-c1u.htm
Not sure if the bar mount will fit the 1 inch Rocket bar though. You'll have to double-check.

http://www.custommounts.com/RAM_B_166_C ... 66-c1u.htm
This should stick on the tank, but I'm not sure on it's suction power at speed.

http://www.custommounts.com/RAM_B_202A_ ... b-202a.htm
Use this standard camera mount with other RAM mount holders.

http://www.custommounts.com

 

[Psydone]

I think I found what I'm looking for these will work with any type of mounted systems like GPS, Music, Camera etc.

a little less obvious than the RAM Mount.

http://www.chromewhore.com/shop/product ... 5cd741b75d
and
http://www.slam1prod.net/

 

[ATMofMN]

Ran across this couple month old thread. Found that I have an easy solution for you.

This tough little tripod comes with a strap to be used to attach to a pole. Works great on handle bars.

Now here are my pictures, each with a link to larger photograph:









To see the results, go to Google, click on Video, and search for: Rocket Sanibel

Boring 12 part ride to work and back.

Hope this helps.

ATM

 

[RIII_PutnamNY]

I've got this device supporting my GPS. It can be adjusted nearly any way you can imagine. It clamps on supertight as well and it's also rubber proteced. This was originally intended for cameras as the description states:

http://www.aerostich.com/catalog/US/Ult ... 16289.html

click on the photo and it'll give you a gigantic close-up of it.

Mine just clamps right onto my handlebar and even though it's not a perfectly round clamp (to match the contour of the handlebar)....it ain't goin anywhere. It's been tested at well over 100 mph :twisted:

 

[Verrarck]

I've been looking at the helmet style cameras that they use for the skaterboarders and dirt bike tricks - they're small, light wieght, most have remote switches, some pack some serious filming time and are fairly cheap...

And with their size you can place them at various places around the bike.

Best places I've seen them at are the computer geek sites (tigerdirect, newegg, etc)....

 

[ATMofMN]

Local Triumph dealer had one of the helmet cams on the service counter a week ago. When I bring my Rocket in for its 500 miler today, I'll inquire more about it.

ATM

 

[1FastRocket]

Psydone, check these guys out. :wink:

http://www.techmounts.com/index.php