balancing the throttle bodies

Has anyone worked out a way to get access to the front throttle body adjusting screw without taking the air intake pipes off, I can get the rear adjusting screw but can't find a way to the front one.
 
TO Rocket, I knew that was coming, but you never know someone might have an alternative while the bike is in warranty.
 
You just know, of course, that all of the vegemite munching wankers are going to chime in with," take that junk off and put on the 3 K&N's" don't you!
And I agree with them
Oi you Marmite licking Tosser I Agree but I would have put in a nicer way.........
motolink; said:
Has anyone worked out a way to get access to the front throttle body adjusting screw without taking the air intake pipes off, I can get the rear adjusting screw but can't find a way to the front one.
Yeah Rip that F##kin Crap off Throw it in the corner of the backyard grow an ivy over it so you never have to look at again and buy yourself some K&N's, problem solved.

See wasn't that a nicer way of putting it.

Actually Jim there is no way short of doing the Above mentioned landscapeing in the backyard
 
In all seriousness I am certain I managed it years ago before I saw the light and put the three filters on. Not sure but I think that if you twist the throttle you can get at the screw and by trial and error get them in sync without removing the junk
 
In all seriousness I am certain I managed it years ago before I saw the light and put the three filters on. Not sure but I think that if you twist the throttle you can get at the screw and by trial and error get them in sync without removing the junk


you can for number 3 but I couldn't get at the screw for number 1.

I have a buddy who's a proctologist, i'll ask him