pietpetoors
Standard Bore
- Joined
- Jul 2, 2022
- Messages
- 7
- Ride
- 2009 Rocket 3 Touring
When I select 4th gear, it is as if does not go in all the way. It goes in, but the moment I release the clutch and apply power, teeth grind on each other.
I realized than when I select 4th on a downhill, leave the clutch and apply almost no power, it will stay in gear. But the moment I apply the slightest power it jumps out of gear.
If I gear down from 5th to 4th and let it run against compression it will stay in gear, but again, the moment I apply power it slips out.
I already replaced the dent spring and it is still the same. All other gears are working fine.
What I do now is to just go from 3rd to 5th , but this is not ideal.
Any help would be much appreciated.
I realized than when I select 4th on a downhill, leave the clutch and apply almost no power, it will stay in gear. But the moment I apply the slightest power it jumps out of gear.
If I gear down from 5th to 4th and let it run against compression it will stay in gear, but again, the moment I apply power it slips out.
I already replaced the dent spring and it is still the same. All other gears are working fine.
What I do now is to just go from 3rd to 5th , but this is not ideal.
Any help would be much appreciated.