Replacement rubber gasket for fuel gauge.
- Thread starter Jallen3.14
- Start date
-
- Tags
- fuel fuel gauge gasket gauge
Ishrub
That's my name ....built like a truck
- Joined
- Feb 18, 2016
- Messages
- 8,851
- Location
- Duffy, Canberra, ACT, AUSTRALIA
- Ride
- 2x2010 ABS Roadsters, Sprint ST 1050 ABS, 3x250s
Rare as hens teeth in any condition and you will likely have more chance of scaring up a used one from someone here with a rashed or busted one that hasn't thrown it away.
Making your own seems practical, plenty of rubber gloves etc of different thicknesses that could be used to source the rubber.
Making your own seems practical, plenty of rubber gloves etc of different thicknesses that could be used to source the rubber.
scot in exile
Living Legend
Had me fooled
and trust me that is not a hard thing to do
and trust me that is not a hard thing to do
Jallen3.14
Turbocharged
Huh. Wouldn't it be great if there were a searchable database of gaskets by ID/OD/Thickness/intended application...
Ishrub
That's my name ....built like a truck
- Joined
- Feb 18, 2016
- Messages
- 8,851
- Location
- Duffy, Canberra, ACT, AUSTRALIA
- Ride
- 2x2010 ABS Roadsters, Sprint ST 1050 ABS, 3x250s
Plumbing catalogs may assist.
Jallen3.14
Turbocharged
That's a good idea.
But... just realized that mine is stretched out worse'n Betty White's wedding tackle, so I'll have to do some cipherin' off the original parts to figure out what size I need.
But... just realized that mine is stretched out worse'n Betty White's wedding tackle, so I'll have to do some cipherin' off the original parts to figure out what size I need.
