rjkusse
.040 Over
I know there's a couple of these floating around but I thought I'd throw one up there as well. I had some questions still so maybe others do too. I thought it was a great idea to add a phone charger but knew using the one from Triumph would not work for the US chargers.
Here's what I bought off of ebay:
Came with the housing, USB adapter, a fused positive lead and a negative lead (both with eyelets to connect directly to the battery)
I understood from others there was a plug behind the left side cover but some had a hard time identifying it. On mine, it was the connector with the blue tape on it.
All I did was remove the leads with came with the kit, created some new leads with spades terminals on the end, connected it to the positive and negative on the back of the adapter (as marked) the the positive into the purple side of the connector and the negative to the black wire on the connector.
Doing it this way it is already using a 10 AMP fuse on the bike. No cutting, splicing or running wires anywhere. Before anyone says anything, yes I'm going to clean everything up and make sure it's water tight. Just wanted the group to know, it's really very easy to add one. I suppose you could mount the charger anywhere you want, just know this is an easy way to get power to it.
Hope this helps!
Here's what I bought off of ebay:
Came with the housing, USB adapter, a fused positive lead and a negative lead (both with eyelets to connect directly to the battery)
I understood from others there was a plug behind the left side cover but some had a hard time identifying it. On mine, it was the connector with the blue tape on it.
All I did was remove the leads with came with the kit, created some new leads with spades terminals on the end, connected it to the positive and negative on the back of the adapter (as marked) the the positive into the purple side of the connector and the negative to the black wire on the connector.
Doing it this way it is already using a 10 AMP fuse on the bike. No cutting, splicing or running wires anywhere. Before anyone says anything, yes I'm going to clean everything up and make sure it's water tight. Just wanted the group to know, it's really very easy to add one. I suppose you could mount the charger anywhere you want, just know this is an easy way to get power to it.
Hope this helps!