TuneECU - does a map....

[dougl]

I uploaded my TuneECU map today. I made it a bit more aggressive by having the last 3 columns of ETV (3) all 100%. I copied the Penner AFR columns to my map. So in essence I kept Rain and Road mode as is but Sport mode now has the extra performance side added. I had no issues uploading the 19 minute procedure. After installing there were no issues flagged or errors reported. I did not do Adjustments but only let the bike idle for 17 minutes and then did a short 20 km test run. The Shift Assist (QS) and Cruise Control remained unaffected. I think it is after 5500 rpm that the bikes feels stronger... so below that it is as normal. I will do a longer run and also see how the fuel consumption is affected. Thank you to all who made inputs and suggestions - much appreciated! Regards!

If you’re going to use his AFR table I suggest that you use his F tables, which he changed, and his L tables, if the L tables are changed in the Penner map you got the AFR table from.

 

[OldBiker72]

If you’re going to use his AFR table I suggest that you use his F tables, which he changed, and his L tables, if the L tables are changed in the Penner map you got the AFR table from.

Thanks! I checked and did that. I just did not want to change Rain and Road mode - which Penner did. The new map was not feeling that much different than stock below 5500 rpm. I will check fuel consumption at normal riding speed. Regards.

 

[HoosierDaddy0866]

One reads many map related posts. A lot of people will install a modified map (usually the ETV and AFR) using for instance TuneECU etc. The whole procedure is explained and seems well covered. However there is not much feedback on how the real performance changed after the map (maybe I just did not see that?) So the question then: Is there a real noticeable difference after the map in a Rocket 3 for instance? If so I wonder why it is not applied more widely? I have a LX dongle and a registered copy of TuneECU, used to reset the service indicator on various bikes. Regards.

I have a 2007 Rocket 3 and I'm looking to have someone put a custom tune on my bike. I do not have the skills or confidence to do it myself and would love some help. I live in Greenville South Carolina so if anyone knows someone near me that can do this please let me know.

 

[OldBiker72]

I have a 2007 Rocket 3 and I'm looking to have someone put a custom tune on my bike. I do not have the skills or confidence to do it myself and would love some help. I live in Greenville South Carolina so if anyone knows someone near me that can do this please let me know.

Not that hard to do provided you have the dongle, TuneEcu and the custom map.. Hope you get someone to help. Blessings!

 

[2023R3GT]

I uploaded my TuneECU map today. I made it a bit more aggressive by having the last 3 columns of ETV (3) all 100%. I copied the Penner AFR columns to my map. So in essence I kept Rain and Road mode as is but Sport mode now has the extra performance side added. I had no issues uploading the 19 minute procedure. After installing there were no issues flagged or errors reported. I did not do Adjustments but only let the bike idle for 17 minutes and then did a short 20 km test run. The Shift Assist (QS) and Cruise Control remained unaffected. I think it is after 5500 rpm that the bikes feels stronger... so below that it is as normal. I will do a longer run and also see how the fuel consumption is affected. Thank you to all who made inputs and suggestions - much appreciated! Regards!

totally different bike isn’t it.