TuneECU - does a map....

[dougl]

I uploaded my TuneECU map today. I made it a bit more aggressive by having the last 3 columns of ETV (3) all 100%. I copied the Penner AFR columns to my map. So in essence I kept Rain and Road mode as is but Sport mode now has the extra performance side added. I had no issues uploading the 19 minute procedure. After installing there were no issues flagged or errors reported. I did not do Adjustments but only let the bike idle for 17 minutes and then did a short 20 km test run. The Shift Assist (QS) and Cruise Control remained unaffected. I think it is after 5500 rpm that the bikes feels stronger... so below that it is as normal. I will do a longer run and also see how the fuel consumption is affected. Thank you to all who made inputs and suggestions - much appreciated! Regards!

If you’re going to use his AFR table I suggest that you use his F tables, which he changed, and his L tables, if the L tables are changed in the Penner map you got the AFR table from.

 

[OldBiker72]

If you’re going to use his AFR table I suggest that you use his F tables, which he changed, and his L tables, if the L tables are changed in the Penner map you got the AFR table from.

Thanks! I checked and did that. I just did not want to change Rain and Road mode - which Penner did. The new map was not feeling that much different than stock below 5500 rpm. I will check fuel consumption at normal riding speed. Regards.