Single Tors Exhaust Mod

Tomcat

i have been around but had a lot of things keeping me non bike occupied at the moment , But the Pipe still has the pop and i have been thinking of changing back to 2 pipes with a better cross over . I have been looking out for a couple of black or graphite cans to make fit .
 
Back to the original post @Wrecka I'm sure with a bit of exhaust tube the right diameter and a bend to cut and shut to get it right wouldn't be that hard to match the original header to the right hand Tors muffler. Or a muffler shop could bend a bit of tube and make one up fairly easy but their going to want money. The heatsheild will cover whatever you do.
 
Tomcat

i have been around but had a lot of things keeping me non bike occupied at the moment , But the Pipe still has the pop and i have been thinking of changing back to 2 pipes with a better cross over . I have been looking out for a couple of black or graphite cans to make fit .
Then you could sell that tidy looking pipe to Wrecka. After I learned to live with the pop I worked out I could make it do it. Handy for scaring the cars around you or the bike following.
 
Then you could sell that tidy looking pipe to Wrecka. After I learned to live with the pop I worked out I could make it do it. Handy for scaring the cars around you or the bike following.

Mines louder Bruce, seriously... people f#ckin jump when it backfires on decel.
 
Was dyno'd at Freds with the old system on it .. need to get it up to Perth and have it re-done I know. Bit like Wrecka it's a time and distance predicament I face.
 
Back
Top