RAMAIR Filters bespoke Rocket-3 underclaw filter.

Mate that is exactly what I want the whole look, does it have the ramair under it does it, and is ozrider a member on here, i would be very interested in that cover for sure...
 
That one has small tripple filters under it but the Ramair would work under Ozrider's claw. Yes Ozrider ( Les ) is a member on here.
 
Cool thank you for the quick reply, Les has sent me a message and I will be getting one of those awesome covers, and more than likely will run the Ramair filter, seems to be a better option.
 
Be aware. If you have Triumph FOGLAMPS fitted - They'll hit the aussie cover on left lock - reduces lock by a fair bit.
 
Hi guy's,

Lucky me I dont have the fog lights, i am going to change headlights though, any idea's?
 
How many others are having trouble stopping there Ramair from popping off the throttle bodies if you tighten the hose clamps up any more than finger tight.I had to put 2 cable ties around mine to make sure it stays on.
 
I had the exact problem you are talking about when I was fitting the RAMAIR system, it seemed no matter what I did the RAMAIR would slip off the TB, what I did was first cleaned inside the RAMAIR tubes then I was very carefully to make sure the ramair body fitted squarely over the throttle bodies. It took a bit of time for me to get right but has stayed on ever since.
I checked the RAMAIR was on evenly on each TB before tightening up the clamps. I can tell you it was very frustrating until I got it right
I know how you feel, hope this helps.
 
I will order one in the next few days. They haven't fit it on a touring model yet, but told me that if it doesn't work, I can send it back. Works for me.

bob


Did it work on the touring?
 
do you oil this filter as you do the K&N?
 
Yes you will need to like any foam filter but it is pre oiled when you get it