Dougl, in the 4th and 5th photos from the top under "Movable Pegs" it looks to me like the pegs are all the way forward on the rails. Is that what's shown in them?
These Peg mounts were designed long before the Roadster when the Standard Peg rails were forward. I do think you could make them work as your wanting to move them forward some. Now the ABS is a different animal so I suspect you will be getting some custom brake lines made.
I like this kit, it is a good place to start from & adapt to your specific needs if need be.
It also gives a bit more ground clearance, mine is a 2004 so cannot comment if it would be "plug & play"
for later abs models.
But if I had a late bike I would still get one, any minor modification needed would be well worth the effort.
How else can you get the ability to move the pegs over such a range with a couple of bolts to find optimum position?
Did I say I like this kit
I like this kit, it is a good place to start from & adapt to your specific needs if need be.
It also gives a bit more ground clearance, mine is a 2004 so cannot comment if it would be "plug & play"
for later abs models.
But if I had a late bike I would still get one, any minor modification needed would be well worth the effort.
How else can you get the ability to move the pegs over such a range with a couple of bolts to find optimum position?
Did I say I like this kit
Thanks, Trirocket. If anyone has actually fitted that kit to a 2010+ Roadster please let us know what is involved.
Today Mr. Raask informed me that he has 6 sets left and does not now intend to make more. The cost per set is $400 plus shipping, which is about $95. Seems like a lot of money but it is less than a seat and a seat can't make a 2010+ Roadster comfortable for a big guy.
Dope on "Engine Stacks" is all that is shown on the page.
Bad directions I'm afraid. I did go to the initial page and clicked on "REAR SETS" which allowed me to choose Triumph Rocket 2004 - However these are rear sets - NOT to move pegs forward. Furthermore, I am doubtful these would work with ABS anyway. Thanks for your efforts!