Boog
Traveling Story Teller
- Joined
- Oct 17, 2013
- Messages
- 8,501
- Location
- Dumfries, Virginia
- Ride
- 2014 R3T, RAMAIR, Full Viking Dual exhaust
So I fixed the fog light issue today. I reported the harness was bad a few months ago and ordered a new one and finally went by and got it. This is the corroded unit.
On close up you can see the corosion and a broken wire.
As I was putting it all back together, (simple plugs) I noticed something didn't
look right, I had the relay in upside down. Don't do this folks as it appears water could easily get in there. So, some dielectric grease is in order and flipped it around.
Now my lights work again.
On close up you can see the corosion and a broken wire.
As I was putting it all back together, (simple plugs) I noticed something didn't
Now my lights work again.