OEM bars , bar end weight screw in thingo watchyamacallit ?

[cr0ft]

Im putting iso grips and internal vibration dampners

Yeah, I meant for me. Though adding the bar end weights should probably help with vibration as well.

 

[HansO]

well you could just cut the left side to match the short right hand side i wanted to keep the width for grips and the also ISO grip end weights are not quite as long as stock weights

 

[cusso ken]

This is going to reveal my advanced age grouping , in the "olden days" we used to fill our motorcycle handle bars with sand to reduce vibration especially on big singles and twins that sent a buzzing vibration to your hands and wrists, just got river sand (not salty beach sand ) heated it up to dry it out completely and slowly poured it with a funnel into the end of the bar that was held upright with the other end plugged ,hard to believe but it works a treat, cheap fix .

 

[ROCKETHEAD]

This is going to reveal my advanced age grouping , in the "olden days" we used to fill our motorcycle handle bars with sand to reduce vibration especially on big singles and twins that sent a buzzing vibration to your hands and wrists, just got river sand (not salty beach sand ) heated it up to dry it out completely and slowly poured it with a funnel into the end of the bar that was held upright with the other end plugged ,hard to believe but it works a treat, cheap fix .

Something my dearly departed brother taught me way back when... and it works.

 

[warp9.9]

Bird shot

 

[cusso ken]

Bird shot

In our Aussie fire arm /ammunition deprived society bird shot may be hard to find ,fine sand poured in slowly completely fills the bars with no gaps I suppose you could use anything to fill the bars ,just saying what we used .

 

[cr0ft]

I honestly have almost no vibration issues at all on my bike, so I haven't even thought about it.

 

[cusso ken]

I honestly have almost no vibration issues at all on my bike, so I haven't even thought about it.

Neither have I on the R3T the big soft grips I have on mine absorb any vibrations and stop people with small hands stealing the bike LOL , I was just mentioning what we used to do before bar weights ect.

 

[barbagris]

Bird shot

Molten lead - or mercury - if you're up for the vapour risk. But It makes the bars BLOODY heavy. Resin filling is lighter and pretty good. My Z-bars are Epoxy filled.

If the resin is liquid enough you could fill standard bars through the hole on the throttle side used for grip wiring.

 

[idk]

I like the idea of mercury. Just imagine the hazmat team required if you ever had an "off".