No Brake light, Horn, Turn Signals...

[wesmc]

I know they all run off the same relay, checked it. It has power and continuity. Can't locate a relay for any of these. Would the fuse have power if the trouble is the ignition switch? Thanks

 

[TURBO200R4]

Bad fuse

 

[wesmc]

Bad fuse

Sorry...I typed I checked the relay...I meant to say I know they are on the same fuse. Fuse is good. Continuity across Volts on both sides.

 

[TURBO200R4]

What year/model do u have
i am working with the early year diagrams right now

 

[wesmc]

2007 Classic. Bone stock

 

[TURBO200R4]

2007 Classic. Bone stock

07 classic is what i have i will look at the diagram tomorrow and post what u should do.

 

[Gerald]

Sorry...I typed I checked the relay...I meant to say I know they are on the same fuse. Fuse is good. Continuity across Volts on both sides.

Check the wires at the fuse with test light or volt meter. Not just continuity across fuse.

 

[Frans]

broken wire at the ignition switch could be the problem, had the same on my 2015 roadster (turn, brake, horn). removed the barrel and re-soldered the wire. Photos in this thread Horn/brake light/turn indicators not working all the time

 

[wesmc]

broken wire at the ignition switch could be the problem, had the same on my 2015 roadster (turn, brake, horn). removed the barrel and re-soldered the wire. Photos in this thread Horn/brake light/turn indicators not working all the time

I will work on getting that switch out next time I can sneak out to garage

 

[wesmc]

broken wire at the ignition switch could be the problem, had the same on my 2015 roadster (turn, brake, horn). removed the barrel and re-soldered the wire. Photos in this thread Horn/brake light/turn indicators not working all the time

Well you got me to the right place ...wires are OK but it's absolutely the internal electrical half of the ignition switch....thanks for the help