Moving footpegs on a GT

[papanorm]

think its half to 3/4 inch, irrespective of value it is noticeable especially for shorter inseam legs.
I eventually fitted R mid mounted controls to my GT which transformed the ride completely.

Can you explain how the R mid mounted controls differ from the stock GT? Thanks!

 

[Howie10257]

I thought about this move too, but it is like 1/3 of an inch move... ??? Wonder if it is worth it, because, I think it might be not perceivable after all is done.

I think it’s an inch each way, I moved my pegs towards me as I’m 5”7 and a bit lol, it def made a difference to me

 

[Vector]

This was great advice. I'm not mechanical but was easy to do. A little tricky with the TSA wire in the way but just had to be a little patient and careful. Neither of which are my strong suits.

I wonder if we could keep the GT pegs and add pegs where the R attaches?

 

[2023R3GT]

Can you explain how the R mid mounted controls differ from the stock GT? Thanks!

They require new brakelines, different brake and gearshift mechanisms other than being mounted in mid position.

 

[2023R3GT]

I wonder if we could keep the GT pegs and add pegs where the R attaches?

without modification, no. With both peg set fitted there is little to no room for manipulating controls and no space if you have large feet/boots.
Mid mounts are the best option IMO even thou at additional cost.

 

[stingray]

Even buying the mid-control kit, you have to reuse one of the existing forward pegs.

 

[Raykartell]

I thought about this move too, but it is like 1/3 of an inch move... ??? Wonder if it is worth it, because, I think it might be not perceivable after all is done.

It is ...I move them back feel more cramped - I will move to the middle-I am 5'10

 

[zenbiker]

this might be an obvious question but is it just the case of moving the 2 bolts in the picture i would like to see what it is like with the pegs out as far as they go, and if so does anyone know what the torque setting for the bolts are? i can't see anything about it in the manual

Have the dealer do it!! Just money!