Let the frustration begin!!!! grrrrr

[ChicagoRocket]

You opened the secondary's or simulated by reaching down in there and rotated the secondary shaft so the butterflies were opened completely before you inserted the Secondary TPS in the dotted line position as per the manual then while holding the secondaries open you rotated it to the position when the bolt would go in?
Just checking s I think this operation is where it winds or unwinds the spring inside it.

No!!!! ****. I did it wrong. Lol. Let me check.

 

[warp9.9]

Anybody know the part number for a primary tps. 16 roadster.

Not to confuse me your holding the secondary TPS sensor aren't you ( I ask because now you asking for the primary TPS part number) and from your picture I can only see one side of it the left side looks blurry or like something is a muck can your rotate the angle a wee bit?

 

[ChicagoRocket]

Yes. Need primary part number. Going to dealer now. If you can post soon that would be great!

 

[ChicagoRocket]

Is this the primary tps part#

 

[ChicagoRocket]

Or this

 

[warp9.9]

I never dealt with Bike bandit so I can not say to how updated their parts diagrams are. I usually use Hermy"s Triumph to chase down part numbers
for instance

Throttles,Injectors & Fuel Rail. For 2016 Triumph Rocket III CLASSIC & ROADSTER | Hermys Tire & Cycle Inc.

this is the 2016 roadster
part #2 matches one of the sensors you posted this is the primary TPS

Part #4 is the secondary TPS sensor different from the numbers you posted.

 

[Nat67]

So warp , I know some people remove the whole secondary shaft , how would one overcome the secondary tps ?

 

[warp9.9]

So warp , I know some people remove the whole secondary shaft , how would one overcome the secondary tps ?

Not sure how they overcome it as I do not know anyone. Maybe they just live with the code. I have 62,000 miles on one of my secondary TPS sensors and it has never failed. In fact the only secondary TPS problems I have read about are people who for some reason pull it and do not re-install it properly. This makes two that I am aware of.

 

[ChicagoRocket]

Dealer had it in stock!

Is the install the same as secondary tps? Hold plates open to install?

 

[warp9.9]

Dealer had it in stock!

Is the install the same as secondary tps? Hold plates open to install?

No The primary TPS is a straight install and is set during the ISCV reset. Throttle plates are shut anyway so it will go right in.