Info needed on TOR exhaust???

[camccardell]

I just read this whole tread and I am totally confused.
I have an 07 r3 classic and there are 3 holes in the cat box. 1 for each pipe. Now if I order the TOR pipes I only get 2 mufflers right? Do do I just cap off the 3rd hole or something? I looked at the CAT bypass pipe and it also goes from 1 into 3. Not enough pictures out there I guess, cause I can't make heads or tails of this.
I was considering putting on a 2010-up roadster exhaust, but not even sure if it will bolt up or not.
Help!

 

[Evil Mitch]

I just read this whole tread and I am totally confused.
I have an 07 r3 classic and there are 3 holes in the cat box. 1 for each pipe. Now if I order the TOR pipes I only get 2 mufflers right? Do do I just cap off the 3rd hole or something? I looked at the CAT bypass pipe and it also goes from 1 into 3. Not enough pictures out there I guess, cause I can't make heads or tails of this.
I was considering putting on a 2010-up roadster exhaust, but not even sure if it will bolt up or not.
Help!

No if you order tors for a standard or a classic u will receive all three pipes . If you only get two than u have ordered roadster tors . Roadsters being from 2010 til present

 

[Evil Mitch]

Maybe the roadster bypass pipe would be an option if u want roadster tors remove your cat and ad the cross over pipe . Not sure if they will bolt up though I've never tried it .

 

[1olbull]

I too spent time reading through this thread and remained confused until this page.
Would have been helpful to me if the OP posted what model he owns.

 

[camccardell]

anyone have part numbers for each kit? Mufflers and bypass pipe? For each model? Would be really helpful information to have.

 

[Mark Dunn]

I don't believe the pre- Roadster TORs are available new anymore.

Mark

 

[mully95]

anyone have part numbers for each kit? Mufflers and bypass pipe? For each model? Would be really helpful information to have.

I'm not sure what you're asking but for the Roadster (2010-present) the crossover pipe is on this page.
http://staintune.com.au/collections/triumph/products/triumph-rocket-roadster

I ordered just the crossover for my Roadster through CalMoto. The part number is at the very bottom of the page. Then I added the TORS exhaust for the Roadster(2010-present) through Triumph. They call them the accessory mufflers.

http://www.pure-triumph.com/p-2979-triumph-rocket-iii-accessory-mufflers-a9608077.aspx

 

[1olbull]

I'm not sure what you're asking but for the Roadster (2010-present) the crossover pipe is on this page.
http://staintune.com.au/collections/triumph/products/triumph-rocket-roadster

I ordered just the crossover for my Roadster through CalMoto. The part number is at the very bottom of the page. Then I added the TORS exhaust for the Roadster(2010-present) through Triumph. They call them the accessory mufflers.

http://www.pure-triumph.com/p-2979-triumph-rocket-iii-accessory-mufflers-a9608077.aspx

Holey Moley, Mully!!!
Staintune wants $1600.00 for just two cans and a crossover and then it still uses the stock headers???
My whole CES header and can system is under $2000.00!!!

 

[CanberraR3]

Holey Moley, Mully!!!
Staintune wants $1600.00 for just two cans and a crossover and then it still uses the stock headers???
My whole CES header and can system is under $2000.00!!!

And the price. Did I mention price?


The thing I find most interesting about this thread is Mitch's fondness for the TORs' sound! He had some less complimentary remarks to make about them when he got his headers and Staintunes. @Evil Mitch

 

[mully95]

Holey Moley, Mully!!!
Staintune wants $1600.00 for just two cans and a crossover and then it still uses the stock headers???
My whole CES header and can system is under $2000.00!!!

Yep it's a crying shame isn't it.