Info needed on TOR exhaust???

I just read this whole tread and I am totally confused.
I have an 07 r3 classic and there are 3 holes in the cat box. 1 for each pipe. Now if I order the TOR pipes I only get 2 mufflers right? Do do I just cap off the 3rd hole or something? I looked at the CAT bypass pipe and it also goes from 1 into 3. Not enough pictures out there I guess, cause I can't make heads or tails of this.
I was considering putting on a 2010-up roadster exhaust, but not even sure if it will bolt up or not.
Help!
 

No if you order tors for a standard or a classic u will receive all three pipes . If you only get two than u have ordered roadster tors . Roadsters being from 2010 til present
 
Maybe the roadster bypass pipe would be an option if u want roadster tors remove your cat and ad the cross over pipe . Not sure if they will bolt up though I've never tried it .
 
I too spent time reading through this thread and remained confused until this page.
Would have been helpful to me if the OP posted what model he owns.
 
anyone have part numbers for each kit? Mufflers and bypass pipe? For each model? Would be really helpful information to have.
 
camccardell said:
anyone have part numbers for each kit? Mufflers and bypass pipe? For each model? Would be really helpful information to have.
Click to expand...

I'm not sure what you're asking but for the Roadster (2010-present) the crossover pipe is on this page.
http://staintune.com.au/collections/triumph/products/triumph-rocket-roadster

I ordered just the crossover for my Roadster through CalMoto. The part number is at the very bottom of the page. Then I added the TORS exhaust for the Roadster(2010-present) through Triumph. They call them the accessory mufflers.

http://www.pure-triumph.com/p-2979-triumph-rocket-iii-accessory-mufflers-a9608077.aspx
 


Holey Moley, Mully!!!
Staintune wants $1600.00 for just two cans and a crossover and then it still uses the stock headers???
My whole CES header and can system is under $2000.00!!!
 
1olbull said:
Holey Moley, Mully!!!
Staintune wants $1600.00 for just two cans and a crossover and then it still uses the stock headers???
My whole CES header and can system is under $2000.00!!!
Click to expand...

And the price. Did I mention price?


The thing I find most interesting about this thread is Mitch's fondness for the TORs' sound! He had some less complimentary remarks to make about them when he got his headers and Staintunes. @Evil Mitch
 
You must log in or register to reply here.

Similar threads

2023 R3 exhaust Mod
Replies
5
Views
1K
stonk
Gt exhaust meerkat modification uk
Replies
8
Views
2K
saltire
Exhaust Mods
Replies
1
Views
1K
2012cliff
Slip on exhaust anyone can do (How i fixed up my rashed out stock pipes)
Replies
3
Views
1K
Mongler07
R3 Touring exhaust options
Replies
6
Views
3K
Kevin frazier
Menu
Log in
Register