Increasing rpm

[1olbull]

I know it all works as a system. I was thinking of using Lush's cams and pistons eventually that claim to bring the bike up to 200hp. I'm not downplaying Carpenters efforts. I'll do it a step at a time.

Contact Patrick @albertaduke he has recently done the Lushie!

 

[Claviger]

There are a couple options to get over 7000RPM on the newer ECU bikes.

1: Microsquirt retrofit
2: Replace with original style ECU and all sensors and gauges etc.
3: PC-V + PC-Ignition Module

 

[Tripps]

I believe you'll get valve float above 7000 with existing valve springs.

 

[Claviger]

Very much so!

North of 7K should be reserved for shim under bucket converted bikes.

 

[joesoap]

Much easier way to more power iff you have the wallet
Rotrex Superchargers | Car Superchargers and Motorbike Supercharger Ki

 

[R-III-R Turbo]

Very much so!

North of 7K should be reserved for shim under bucket converted bikes.

Unless it's @Steel 's stock motor

How high can you put the rev limit safely on a stock Roadster?

 

[warp9.9]

Unless it's @Steel 's stock motor

How high can you put the rev limit safely on a stock Roadster?

I run 8000 with the SC kit and OEM springs and buckets but that does not mean it wasn't risky !!!!