Help taking the engine out, no idea how honestly

Itomis said:

I did this procedure with my bike when I was changing the damper shaft bearing.
You can find out how to do this by clicking on the link.

Engine removal and refit (Triumph Rocket III, 2004-2018: Engine and systems: Engine repair)

Article «Engine removal and refit» from section «Engine and systems: Engine repair» from repair manual of motorcycles «Triumph Rocket III» 2004-2018 years.

motoinstruction.ru

Do not forget to unscrew the oil pressure sensor before removing the frame.
The whole procedure took just over two hours. A friend helped to remove the frame, it was a bit difficult alone.

Click to expand...

You used lift or a pulley? kudos to you..

Yo! so I was having the same issue and @r-iii-r-turbo help me with the advices...is easier than its looks. you will need some tools. I use a Forklift form work and a motorcycle lift from amazon. If someone can help him to make a list. Do you want to rebuild your old engine? (recommended)

leocohete said:

You used lift or a pulley? kudos to you..

Click to expand...

Two wooden beams were placed under the engine. I removed the wheel, the pendulum, the tank, the exhaust manifold, the radiator, the intake, the footrests, disconnected all the wires, unscrewed the oil pressure sensor. Unscrewed the frame from the engine. With the help of a friend, I removed the frame from the engine. Nothing difficult for a person who knows which way to unscrew the nuts.
Of course, it will take longer to collect, taking into account the moments and adjustments.