Carms4321 Standard Bore Joined May 3, 2025 Messages 3 Ride 2007 rocket Yesterday at 1:02 PM #1 My front engine main bearing is walking forward. Wondering if it can be replaced by removing lower section of engine Also is this a weakness in this design Or Wondering what might have cause it to fail Thanks
My front engine main bearing is walking forward. Wondering if it can be replaced by removing lower section of engine Also is this a weakness in this design Or Wondering what might have cause it to fail Thanks
Tripps Retired superhero Joined Oct 9, 2010 Messages 11,494 Location Florida and NY Ride R3T,Sprintona,K1200GT, Blackbird,r/65 hack Yesterday at 1:06 PM #2 I can't remember ever hearing of a bearing failure before
Carms4321 Standard Bore Joined May 3, 2025 Messages 3 Ride 2007 rocket Yesterday at 1:13 PM #3 Was quite surprised when I found it Started making some noise, plus the oil pressure was bit erractic. Hoping to slip a new bearing in from underneath. The rest of the motor was doing fine
Was quite surprised when I found it Started making some noise, plus the oil pressure was bit erractic. Hoping to slip a new bearing in from underneath. The rest of the motor was doing fine
Kevin frazier Widowmaker! Joined Dec 22, 2018 Messages 7,713 Location Nashville Ride 2008 Triumph rocket 3 touring Yesterday at 1:18 PM #4 I assume you are referring to balance shaft bearing? Case has to split. Erractic oil light means something is wrong. Post a picture of the bearing.
I assume you are referring to balance shaft bearing? Case has to split. Erractic oil light means something is wrong. Post a picture of the bearing.
Carms4321 Standard Bore Joined May 3, 2025 Messages 3 Ride 2007 rocket Yesterday at 1:21 PM #5 Kevin frazier said: I assume you are referring to balance shaft bearing? Case has to split. Erractic oil light means something is wrong. Post a picture of the bearing. Click to expand... Yes I know case needs to be split Bearing is directly behind lower timing chain gear
Kevin frazier said: I assume you are referring to balance shaft bearing? Case has to split. Erractic oil light means something is wrong. Post a picture of the bearing. Click to expand... Yes I know case needs to be split Bearing is directly behind lower timing chain gear
Kevin frazier Widowmaker! Joined Dec 22, 2018 Messages 7,713 Location Nashville Ride 2008 Triumph rocket 3 touring Yesterday at 1:46 PM #6 There ya go, youre on it.