Fork Seals

[warp9.9]

That's how I did mine.

Yes I get lots of information out of the manual.

 

[EasTexRIII]

Do you mean like the directions in section 14 of the manual?

Now THAT'S how you put a man suffering from major brain fart in his place........ Deservedly so!
What a Maroon I am

 

[EasTexRIII]

Yes I get lots of information out of the manual.

So do I....................................................... sometimes
Thanks for putting the coffee under my nose

 

[warp9.9]

I am not kicking you dude I just looked at the manual when the post came up as I did mine with Blaine and since we were modifying the fork innards with the Ducati stuff we only used the manual for torque specifications. Anyway after looking at it I can say we approached it a little different as speedy explained above. try the bottom bolt first make sure you allen fits in snug and all the way. Ball end all might just mess it up. If it works your home free if not them you back up top pulling the cap and tension on the spring so you can get the nut up high enough to remove it.

 

[EasTexRIII]

I am not kicking you dude I just looked at the manual when the post came up as I did mine with Blaine and since we were modifying the fork innards with the Ducati stuff we only used the manual for torque specifications. Anyway after looking at it I can say we approached it a little different as speedy explained above. try the bottom bolt first make sure you allen fits in snug and all the way. Ball end all might just mess it up. If it works your home free if not them you back up top pulling the cap and tension on the spring so you can get the nut up high enough to remove it.

Oh, I know you weren't. I was laughing at myself. I'm trying to be preemptive before ordering progressive springs.
Now if I could just find the stupid manual.........................................

 

[idk]

Oh, I know you weren't. I was laughing at myself. I'm trying to be preemptive before ordering progressive springs.
Now if I could just find the stupid manual.........................................

If you can't find it, then print another one.

 

[EasTexRIII]

If you can't find it, then print another one.

Ok, now ya'll are just plain picking on me
Don't you know bullying is forbidden in the new world odor
I'm off to my safe place

Now where did I put that printout of idk's manual?.......................................

 

[Rocket Scientist]

The more I learn about these forks the more I want to change the springs to Progressive.

Go for it, Mully, you won't be sorry!
Large, noticable improvement!

What he said !

 

[mully95]

What he said !

Hate to admit it but I'm still chicken.

Got to do some reading up on the proper procedure. At the moment I have no clue on where to even start.

 

[warp9.9]

Hate to admit it but I'm still chicken.

Got to do some reading up on the proper procedure. At the moment I have no clue on where to even start.

Start slow Mully first figure out where your going to buy the springs then buy them.