Dynojet POD-300 Digital Displays are on sale at MotoMummy for US$195.

Good sale!!

For those not in the know this can provide you with a digital speedo, coolant temp, battery voltage, has warning lights you can configure etc. Those gauges the R3 is sorely missing in one easy item.

It requires only 1 cable that’s it, connect straight to PC-V, no power wires needed.
 
What kind of mounts come with the unit?
 
And if you have an AT-200 with wideband O2 sensor/reader it will show live AFR on the go.

Dynojet POD-300 Digital Display

The Dynojet POD-300 is an accessory display for Dynojet devices that support DJ-CAN; including the popular Power Commander V PCV, AutoTune, WideBand 2, and CMD.

Simply connect the included CAN cable and you’re ready to go; there’s no need to tap power or deal with other messy connections.

Need to adjust your tune in the field, or datalog the supported channels to further refine your tune? No problem, with the POD-300 you’re just a few clicks away from taking advantage of the many features with it’s easy to use menu system.

Features



  • Real time fuel adjustments
  • Display channels real-time: RPM, TP, map position (when using map switch), duty cycle, fuel change, ignition change & wideband air/fuel ratio- (w/WB2 or AutoTune connected)
  • Weather resistant for use in all conditions
  • Log channels saved to internal memory and can be viewed / analyzed with Dynojet’s PowerCore Software
  • High contrast display, viewable in direct sunlight
Review
 
warp9.9 said:
What kind of mounts come with the unit?
Click to expand...

Dynojet POD-300 Digital Display | 10% ($25.00) Off! - RevZilla

Product Description
Item #: 980712
Dynojet POD-300 Digital Display
The Dynojet POD300 is a great tool to monitor in real-time your motorcycle’s engine, air and fuel information. It enables display of data from Power Commander V, AutoTune, WideBand 2, and CMD by way of a included CAN cable. This includes real-time engine rpm, coolant temp, throttle position, map position (when using map switch), duty cycle, fuel change, speed, pressure, ignition change & wideband air/fuel ratio (w/WB2 or AutoTune connected). With a few clicks of the simple to use menu in the POD-300 you can also log data from your ride to analyze afterwards.

Features:
  • Real time fuel adjustments
  • Weather resistant for use in all conditions
  • Log channels saved to internal memory and can be viewed / analyzed with Dynojet’s PowerCore Software
  • High contrast display, viewable in direct sunlight
  • 3 programmable light alarms
Note: Handlebar mount sold separately.
 
warp9.9 said:
What kind of mounts come with the unit?
Click to expand...
Mine came with none. Dual-Lock works fine. You can also modify the PCV maps on the fly - to a limited extent.
And if you have an AutoTune and want to fine tune - pretty much indispensable.
For me the key point - Data Logging.
 
There’s a GPS mount that can be used with a ball mount on the back. I’ll have to look when I get home on Friday to get you the details, out of town at the moment.
 
POD300 Mount plate:
It uses a smaller ball than RAM Mounts so you’d need to find a ball of the smaller size to mount it to, I absolutely cannot remember where I got the ball portion that matched, I think it was eBay.
 

Does the connected PCV have to be engaged?
 
It has to be hooked up but doesn’t need to be modifying anything and can be used as just a sensor reading device.
 
You must log in or register to reply here.

Similar threads

Exhaust availability in US
Replies
3
Views
865
atomsplitter
Record run for Rocket 3 at Bonneville Speed Week 2024
2
Replies
15
Views
3K
Justdad
New CF Parts on EBay
Replies
1
Views
632
Sparky59
Oh yeah boys we are going back to Bonneville Speed Week in 2025
2 3
Replies
23
Views
3K
Gerald
For my fellow Carpenter Captains.
2 3
Replies
20
Views
2K
rick danger
Menu
Log in
Register