Does Corbin Solo saddle bolt on?

I was thinking I could bolt on some cup holders to that backrest.
and maybe hang fuzzy dice from them, too.
 
Oh, and I also have a windscreen ;-)

While I'm at it, Any Corbin owners have the Carbon-fiber look stuff on the seat?
Butt pan, sides,, Fast gun end cap?

Not the sissy boy shiny finish, the flat finish.
 
I'd like to know if the Classic Solo sit any lower than the OEM???
 
I'd like to know if the Classic Solo sit any lower than the OEM???

Won't you be able to tell us all shortly?
Pic below with Solo fitted with stock pillion behind. Compare profiles.

Rider seating: 14.5" wide x 15" long
Rider back support w/ #02-S: 12" - 13"
Approx. seat height: 27"

Corbin Motorcycle Seats & Accessories | Triumph Rocket III | 800-538-7035

upload_2017-5-21_0-7-43.png
 
Last edited:
I'd like to know if the Classic Solo sit any lower than the OEM???

I can only speak from the perspective of the FastGun which I bought specifically after being told by different people and getting height measurements that it definitely drops you. I am only 6'0" with a 32" inseam and before I was using tippy toes (dangerous obviously). Now I feel much more confident. Figure about 1-1/2 inches or so.
 
I can only speak from the perspective of the FastGun which I bought specifically after being told by different people and getting height measurements that it definitely drops you. I am only 6'0" with a 32" inseam and before I was using tippy toes (dangerous obviously). Now I feel much more confident. Figure about 1-1/2 inches or so.

Different model to Classic Solo but similar specs:
Rider Seating: 14" w X 15" l
Approx. Seat height: 27"
Back support: 6.5"

Corbin Motorcycle Seats & Accessories | Triumph Rocket 3 | 800-538-7035

upload_2017-5-21_15-16-44.png
 
Back
Top