Hi Steve, i have just ordered a set of these, What was it like removing the standard exhausts and Cat ? do the Campbells just bolt straight to the Single Manifold outlet and finally, What do they sound like with the Baffles in (or out if you have tried it yet )
Cheers for any help you can give me.[/quote]
Trumpet, my stock pipes had been on and off a few times so nothing was seized up, depends how old your bike is but the clamps should come off with some wd40 the bolts are 12mm socket size, the Campbells are a slip on fit to the single header outlet, I found the new clamp that came with the pipes wouldnt tighten the joint enough so I used the stock packing ring between the clamp and the pipe, I found them a bit quiet with the baffles in but too loud for me with them out so I have opend up the inner ends of the baffles and refitted them, if you remove the baffles only take out 3 bolts on each end cap the other 3 are dummies.