Brake pads


Kevin knows good pads...his weight plus the mass of the bike... that’s almost a ton of rolling mass! Then add his dainty passenger and gear for a weekend trip those pads take a beating...what is the bike rated for?

I am still running the Brembo pads fro t and rear at 11,500 miles. Thought I needed the rear replaced at 8,000 miles and pulled them off to inspect, but totally fine at more than 50% above wear marks. The Brembo pads should last much longer than 5K miles.
 
EBC, brembo, are fine I've even used Galfer , right out of cycle gear while on the road Might even be a few other manufactures out there. On the road any pad is better then none. Watch the rear you'll need them first. The rear can be changed in less the 5 min. on the side of the road. Usually two rears to one front. I always carry a spare set of each in my air box as ya never know.
 
Last edited:
I ride solo only, where did you find front brembo pads as I can’t
 
EBC are fine watch the rear you'll need them first. Usually two rears to one front. I always carry a spare set of each in my air box as ya never know.
Exactly what I experience with the rears, I was wondering why as I try to be easy on rear since no abs on the widow maker and I get on the fronts hard
 
No wonder you were the fixer on the ship
On my second cup noe so another thought is the rear also has to deal with fight the engine turning it. By the I mean your criusing under slight throttle and you apply the brakes quickly. Like normal nothing dangerous but with some or all drive motion on the rear its got to add a little more wear . Sure everyone things they get of the throttle before the brake releases. But I doubt that so more friction wear I suspect.
 
Well tha
first guess would have something to do with twice the amount of brake pads and rotors on the front
when I read your first reply my mind went to the bridge and your captain calling you and saying ( warp find out why we don’t have hot water and you answering saying( my first guess captain is were out of coal sir
 
I've got a Touring, got 30K out of the OEM pads & replaced them with OEM. Had EBC and didn't like the way they sat on the disk. Plus they had about 30% less surface area which I didn't like too much.
 
Well tha

when I read your first reply my mind went to the bridge and your captain calling you and saying ( warp find out why we don’t have hot water and you answering saying( my first guess captain is were out of coal sir
I'm a firm believer in Nuclear Power,

Even for electricity