Air filter mystery brand/model

Scuba Craig

Supercharged
Joined
Jun 28, 2014
Messages
337
Location
Terrigal, NSW
Ride
2010 R3R + TOR + RamAir
Does anyone know what brand/model this air filter is? I inherited 3 of them with my 2010 R3R.

Measurement-wise it is 78mm high. The base is not much wider than the throttle-body opening. (apologies to those of you who still work in inches :notworthy:). It says KY60 on the bottom, but I haven't been able to get Google to bring up anything that looks similar. http://lmgtfy.com/?q=KY60+air+filter

I don't want to turn this in to a thread about the suitability of these filters to air-flow and performance. I'm just trying to identify what they are for now.

2014-07-11 10.48.30.jpg
 
While I don't use them myself...it looks similar to the K&N filters used in the bearclaw modification to use three of them and bypass (and usually use for storage) the regular air filter in the regular air box under the seat. There are plenty of pics of this type of mod on the site.

Dennis
 
Craig you may recall I mentioned I thought they were to small in the other thread and suggested going to a Ramair filter well @Neville Lush is your man to buy them from here in Auss
 
Craig you may recall I mentioned I thought they were to small in the other thread and suggested going to a Ramair filter well @Neville Lush is your man to buy them from here in Auss

That I do. This thread was just to identify what they were. Will look in to replacing them at/around the same time my TuneECU cable arrives.

And will get prices from Neville.
 
Back
Top