HansO
Not Taking Life Too Seriously
- Joined
- Apr 4, 2010
- Messages
- 13,447
- Location
- Batemans Bay, NSW, Aus
- Ride
- 08 Rocket III R.I.P now TEX Triumph Explorer
I wanted to move the number plate, indicators etc up away from the tyre and while I was at it I fitted the driveing light minus the blue rings ( I removed the blue rings as the local Highway patrol Sergent could garentee that another officer might not try and book me as blue lights are no longer allowed on trucks cos they can confuse the Safety Cam truck safety cameras), so I have mounted some Stainless Steel "L" brackets I made onto the kuryc' highway pegs clamp's and as Mexican said the wireing is more than long enought.
The number plate holder was quite a lot easier as all I had to do was cut a v in the bractet in both sides then just weld them back up so the bracket is now nearly 90 degree instead of the 60 degree it was then because I had already lifted the rack up by 60 mm ( just over 2 inches) I then just monted the bracket under the rack useing the oringinal hardware used to fix it under the guard also wired up the LED brake light in the spoiler on the lid of the trunk.
The number plate holder was quite a lot easier as all I had to do was cut a v in the bractet in both sides then just weld them back up so the bracket is now nearly 90 degree instead of the 60 degree it was then because I had already lifted the rack up by 60 mm ( just over 2 inches) I then just monted the bracket under the rack useing the oringinal hardware used to fix it under the guard also wired up the LED brake light in the spoiler on the lid of the trunk.