Extend front brake line on GT

A1A Rider

Go big and go broke
Joined
Dec 26, 2024
Messages
293
Ride
Rocket 3 Storm GT 2025
I put risers to bring handlebars up and find a need to add to GT a few inches (~3) of brake line to bring the handlebars to have the ability to bring the handlebars closer to me, current lines are stretched and I did put the line connections at an angle.

Are there companies that offer brake lines for Rocket 3?
 
I haven't looked at mine specifically, but usually it's a single brake line that goes from the handlebar to a coupling under the steering head where the line splits to the ABS and front brakes. Most times you can simply reroute the existing hose to get the added length when adding risers (like move it from in front of the steering head to behind), so you don't have to replace the brake line. Most brake lines can be replaced with aftermarket units, make sure to get stainless steel braided line if you replace.
 
Mine are already routed most efficiently. I just want slightly more. If I'd position the handlebars towards me a tad, lines would be at stretch, not good.

I thought maybe some company already sells kits sized for the rocket.
 
Mine are already routed most efficiently. I just want slightly more. If I'd position the handlebars towards me a tad, lines would be at stretch, not good.

I thought maybe some company already sells kits sized for the rocket.
Not really, you need to measure the length you need and buy the hose with the correct banjo orientation. You'll also want new banjo seals. Give these guys a shout and see if they can help you: High Quality Brake Lines | Custom Brake Lines | Spiegle
 
Back
Top