hey guys i really like the look of the 3 k&n filters on the r3 is there a kit that i need to buy for my 08 r3 and does it help hp or is it just for show. also what about riding in the rain, will the intake cause any problems. i also have jardines on the bile full system and a power commander 111 is there a map for that set up. ok thanks for any info and ride safe
Flipmeisters also sells the dry chargers on his site if you are worried about rain coming into the filters. As far as a tune for the PC III, I have some tunes for the PC III for triple filters; however they are also for Pred exhausts and may not do you any good and may make you run rich due to the difference in the exhausts.
The K&N's also provide intake roar. If you are concerned with rain either use the dry chargers or go under bearclaw (my particular setup). I rode three days in torrential rain (where road spray rooster tails about 30 feet) with zippo problems. Parked over night in the rain, started right up next morning, rode all day (in a monsoon). The only thing negative was how dirty the bike got, it ran flawlessly.
Flipmeisters also sells the dry chargers on his site if you are worried about rain coming into the filters. As far as a tune for the PC III, I have some tunes for the PC III for triple filters; however they are also for Pred exhausts and may not do you any good and may make you run rich due to the difference in the exhausts.
Triple K&N's DO fit under the bearclaw.. if your worried about rain. I cut mine for appearance, but have 2 mates with un-modded claws ( running filters)
Our pre developed map # M510-005 is the closest to your setup that we currently have available in our map database library. The air flow characteristics between the two setups should be similar enough for the map to work for you as a starting point You also always have the option to have the bike dyno tuned and custom mapped specifically for your bike's setup and or riding style if you like at one of our approved tuning centers in you local area if you want to get it 100% optimized.
If you have any more questions let us know.
Thanks
Chris Kelly
Dynojet Research
2191 Mendenhall Dr. Suite 105
North Las Vegas, NV 89081
1-800-992-4993
Triple K&N's DO fit under the bearclaw.. if your worried about rain. I cut mine for appearance, but have 2 mates with un-modded claws ( running filters)
I have mine under bear claw, I shimmed claw out about a half inch and used black 1/2" foam tape on tank to fill gap. It looks factory and gives plenty of clearance.