Resource Download Touring Tune by Nels at TwoWheelDynoWorks 2018-06-09

[Claviger]

Claviger submitted a new resource:

Touring Tune by Nels at TwoWheelDynoWorks - Full Remap of F/L/I tables done by Nels for a Touring With TORs and RAMIAR/K&Ns

Redline at 6500
Fan Activation at 95c
Speedo -5.5%
Speeed Limit 299kph

Read more about this resource...

 

[Jeremy Holm]

Just ordered my RAMAIR and have TORs, been riding this bike for 8 years and finally decided to unleash it. I downloaded TuneECU and I also have a cable ordered. As soon as the new air filter and cable arrive I want to do this long overdue remap of my Rocke Touringt. I saw one that may be this same tune on the TuneECU website done by Nels. Should I ise rhe one from the site or this one? Does this tune open the secondaries?
Thanks

 

[barbagris]

Both are probably fine. Like everything FREE it is question of faith. If Rob has posted it on here - you can be pretty **** sure it is safe and 100%. Download it and open it in TuneECU - you'll be able to see if the plates are are open. Learn to use TuneECU offline before you connect to your beast. It is ALWAYS A RISK and you should understand the software a bit. RTFM.

 

[Jeremy Holm]

Both are probably fine. Like everything FREE it is question of faith. If Rob has posted it on here - you can be pretty **** sure it is safe and 100%. Download it and open it in TuneECU - you'll be able to see if the plates are are open. Learn to use TuneECU offline before you connect to your beast. It is ALWAYS A RISK and you should understand the software a bit. RTFM.

Been watching a few video tutorials to learn a little about it before I make changes. I don't plan on trying to make any changes myself, but you're right, some good basic knowledge of what changes are being made is smart.

 

[Claviger]

Before I link tunes for people or post them, I review the file.

I posted a file years ago that had corrupt ignition tables in it, it was also loaded in my bike. I went and had it dynod and had some weird rippling on the torque curve. Went and checked the I-tables and they were just chaos everywhere, I cant believe the bike ran actually. I put out a warning about it, and now, ensure I check everything I link.

For those unaware, the R3R_Slip tune from PowerTripp is a corrupted file, DO NOT USE IT. The R3T_Slip file, is fantastic though.

 

[Jeremy Holm]

Thanks for all the time and effort you put in. It's appreciated by myself and others more than you'll ever know

 

[Idaho Red Rocket 3]

I see the difference. R3Roadster_Slip is bad.

R3Touring_Slip is GOOD. That is the one I have loaded for several friends. Yes they love it.

 

[bloodnut]

Nels tune sounds good but as TORS are no longer available would the tune be ok with RAMAIR and stock mufflers

 

[Claviger]

Nels tune sounds good but as TORS are no longer available would the tune be ok with RAMAIR and stock mufflers

It'll be a bit rich for that configuration, but not horribly so. There are other options out there besides TORs, and there's a good selection of TOR's usually to be found on the used market.

 

[dutch]

Looks like the tune I got from Bob. Did > 8000 km's with it. Runs very good. Only some sneezing when shifting to a lower gear while revving the engine.