tors questions

Just had tors and cat delete installed. Major popping on decel. Looks like the posts here are going to be a great help. Maybe going to buy tuneboy, try the 20050-2 map, and the pciii o2 sensor delete (xtra hp in 1-3 would be nice). Am I on the right track?

Also, a potentially stupid question. My tors on the right hand side don't point in the same direction! The top pipe points more to the rear of the bike than the bottom one, which points more outward. Seems like Triumph pipes ought to line up. Before I bust the dealer for this, is this normal for tors?

Thanks for any input,

dongee

You will not need the pc111 o2 delete , as you can turn it off with the tune boy now .

Wonky top pipe. Loosen the clamp that secures the top pipe to the cat by-pass and make sure it's seated fully as far on as it will go. Alternatively loosen the clamp on the bottom pipe and pull it slightly away from the by-pass.

This is a good time to coat everything liberally with coppa-slip for when you need to dismantle things at a later date.

Z

Thanks for the advice. I'll give it a try.

dongee