Speedo/tachometer problem, resets after every drive.

cskals

.060 Over
Joined
Apr 12, 2017
Messages
104
Location
Fyn, Denmark
Ride
R3 standard 2005
Hi all.
I changed my clutch last week, and ever since, my tripcounter resets every time I turn of the bike.
Also, the Tachometer and all the lights on it, doesn't work.
The backlight is on, but the indicator lights and so forth are not working.

I assume that when I disconnected the fan I must have pulled in som other wires, but after investigating all the connectors, it all look fine.

So I guess it's a loose connection, so my question is, which connector/color of wires am I looking for?

Thanks in advance.
 
Given the issues you're describing it defo sounds like you've disturbed a connector bloc or worst case scenario pinched so.e of the wiring harness whilst reassembling.

I'd start at the handlebars, work back towards the ecu/battery and check everything, unplug and connect again, may as well clean/grease as you go. Just make sure you haven't pinched any wires when you're in there.
 
i would check the fuses and make sure u have 12 volts on both sides of the fuses
 
Thanks all for your input.

I was hoping for a hint on the colors of the wires I should look for.

But if nobody knows, then it's back on it

Thanks again.
 
one of those fuses
when it is bad it causes the trip to reset. i can not remember witch one. there has been people work on their bike for a while and then find the fuse bad.
does the tail light work?
check all the lights ect if u can come up with something pacific i can more than likely give u a color of that circuit.
do you have manual?
just now posting after 2hours break



























































?
 

Hi there.
You were right, after I worked several hours to find the bad wire, I checked ALL the fuses and yes, the one for "heated grips" were blown.
My bike don't have heated grips though, but changed it and all good now.

Thanks all.
 
You must log in or register to reply here.

Similar threads

Dreaded high idle problem
Replies
9
Views
138
Kevin frazier
Speedo failure.
Replies
5
Views
224
Bunny Burrell
Drive hub
Replies
2
Views
167
Bunny Burrell
Idle problem in neutral solved
Replies
1
Views
483
papanorm
Lash caps after cam mod
2
Replies
16
Views
163
Kevin frazier
Menu
Log in
Register